Getting Your Springo Access Point Connected
Quick & Easy Setup
Congratulations, you have received your Springo box, giving you access to Smarter WiFi, better marketing and more customers.
Once you’ve opened your new Springo box, you’ll find everything you need to get connected.
Let’s have a look at what’s inside.
This is your WiFi access point, this device takes care of connecting your visitors to Springo WiFi
Front View Rear View
This is your power pack, This device is responsible for connecting your WiFi access point to both your electricity and internet supply
This is your power cable, the power cable will get your power pack connected to your mains electricity supply
These are your Ethernet cables, you will be supplied two of these, their job is to connect your access point to your internet supply
We provide a selection of fittings so you can wall / ceiling mount your WiFi access point. Further details can be found by visiting https://springo.io
OK, let’s get going!
Step 1.
Flip your Springo access point upside down, remove the mounting plate by lifting the locking tab and rotating the mounting plate anti-clockwise then lift it away. The mounting plate can be used to position your WiFi access point on the wall or ceiling, further details can be found by visiting https://springo.io
Step 2.
Using one of the supplied ethernet cables, connect the Ethernet port on the WiFi access point to the ethernet port marked as POE on the Power pack.
Step3.
Using your second ethernet cable, connect the ethernet port marked as LAN on the Power pack to a spare ethernet LAN port on your broadband router or network switch.
Step 4.
Connect your power lead into the rear of the power pack and connect to your mains electricity supply
Your completed setup should resemble the below diagram
The front of your access point will give off a white glow and begin to flash while it calls home to Springo. Give us a minute and your access point will give you a steady blue light to let you know it’s ready. Now let’s head on over to https://hub.springo.io to personalise your new guest WiFi portal.
